| INPUT SENSITIVITY |
|
| Mic |
-40dBu |
| Line |
0dBu |
| INPUT IMPEDANCE |
Balanced: 20kΩ; Unbalanced: 10kΩ |
| HUM AND NOISE |
-90dB |
| Maximum Input Level |
+20dBu |
| AC Power Options |
JP, FG, UK, SA, US |
| Dimensions (HxWxD) |
556mm x 384mm x 312mm / 21.88" x 15.11" x 12.28" |
| Equalization |
HIGH (±10dB) 10KHz Shelving; LOW (±5dB) 100Hz Shelving |
| DIMENSIONS & WEIGHT |
|
| Net weight ( kg / lbs ) |
12.4kg / 27.28lbs |
| Gross weight ( kg / lbs ) |
15.5kg / 34.1lbs |
| Finish colour |
Black |
| Amplifier Protection |
Power switch on/off mute; DC detection; Overload and short-circuit detection; Thermal/Heat sink protection; Output mute/auto reset |
| Low Frequency Power |
250W RMS |
| High Frequency Power |
50W RMS |
| Monitor Filter |
A 90Hz HPF Filter for stage monitor use. |
| Remote Gain Attenuator |
3 pin Euroblock connector for remote volume adjustment of the Titan 12D. Linear control of the volume is achieved by variation of the applied voltage. |
| Limit LED |
Shows when either signal limiter is active (LF or HF). |
| Power Amplifier Type |
Dual Class D modules (LF and HF). |
